99 Three Sisters Lane

By Michael Cohen on October 14th, 2016

Take flight around our modern farmhouse for sale in Amagansett village.


Video of Three Sisters Lane in Amagansett (2 min.)

By Michael Cohen on October 9th, 2015

Modern Hamptons Farm Houses Drone/Time-Lapse Video.

Goodfriend Motors

By Michael Cohen on April 14th, 2014


Goodfriend Motors is a state-of-the-art, auto showroom and storage facility built by and for collectors (and designed by Modern Green Home).  There is nothing like it on the East End.

The facility is equipped with industry standard security, an elevated entertainment lounge overlooking the gallery, a high-end AV system, temperature and humidity control, radiant heat in polished concrete floors.

Members will receive individualized parking spaces with battery tender alongside 24/7/365 security via keypad and remote camera access via mobile app.

For more information, go to the Goodfriend Motors website.  For more pictures, scroll down…

corvette_goodfriend motorsDSC_7534DSC_6256DSC_6354


Wainscott Woods

By Melissa Delihas on August 14th, 2013



This Wainscott shingle-style home was built in 2003. The basement is being renovated to accommodate bedrooms, a media center and a gym. Below the stairs will be a hide away ‘club house’ for the kids. An unfinished portion will remain.

A basement cement wall and window are being replaced to make the area watertight and to provide a means of egress.

Installation of InSoFast panels will provide the ultimate insolation with seamless tongue-and-groove interlocking. Moisture control channels keep the assembly dry and prevent mold. Polypropylene studs are embedded for secure attachment of the drywall panels.

A french drain system is being installed around the perimeter of the basement in case of flooding.

Within the recessed egress wells, the means of egress double as skylights providing a 5 foot by 9 foot sunroom-like nook inside of each bedroom. The large egress well skylights will allow light to fill the room.

Egress well dugout by the front entry.

The cement foundation wall is precut and ready to drop.

The cement foundation wall has fallen.


Setting the forms for the egress wells.

Reinforcing rebar inside of the egress well forms.


Pouring concrete into forms for the egress wells.

Filling the forms.

Removal of the concrete forms.

Waterproofing of the egress wells.

Photo 22
Demo for the french drain system.

Photo 17
The pipe for the pump system which surrounds the entire basement perimeter.

Photo 21
The edge of the foundation for the french drain system.

Photo 15
Trench for the french drain.

Photo 12
Trench with backfill on left, concrete on right.

IMG_0185InSoFast panels on the foundation walls.

Photo 23Detail of the InSoFast panels.

IMG_0186A view of what will soon become the kids’ club house.

IMG_0181Steel stud wall up to the waste line on the foundation wall.

Interior framing of the basement; a view of the gym.

IMG_0180Steel framing of the basement walls.

..More updates to come!

Southampton Estate Section – In Process

By Melissa Delihas on July 29th, 2013


Gin Lane is a 3,000-square-foot guest house renovation on a 27-acre property near downtown Southampton. The structure was initially built as a garage in the 1920s, and then transformed into a caretaker’s residence sometime in the 1950’s. The MGH design team had to work closely with the Building and Zoning departments to permit a modernization and update to the aging and thermally inefficient home. By adhering to the existing footprint and roof line, MGH was given permission to improve the existing shell, and bring it up to present day structural and energy use standards.

The guest house has a large and open kitchen / dining / living area downstairs with a secondary living / media room. Upstairs, there are three independent suites, each with their own bathroom and high ceilings.

As with most remodels, the selective demolition process revealed some unexpected conditions such as poor foundations and elements of the wooden structure exposed to below grade moisture. The construction management team replaced and retrofitted these areas to meet current standards for frost depth, waterproofing and soil bearing.

The completed structure will exceed energy efficiency standards, utilizing 1” of continuous insulation on the exterior, in addition to 2” of closed cell spray foam throughout the ceiling and walls. A geo-thermal system will heat and cool the building throughout the four seasons, transferring energy from below grade into all areas of the house through hydronic tubes cast in concrete.

Interior finishes include polished concrete, white stained oak flooring, and dark bronze window frames. A simple modern kitchen with bar seating will be furnished by Bakes and Company, and all bathrooms are being refitted with modern fixtures.

The home will be ready to receive guests in late September.

Here are some in-process photos:

IMG_0179The existing guest house stripped back to the gable ends and first floor walls. This was the extent of the demolition.

IMG_0173 copy

Interior of what will be the new kitchen and living room. In some cases, remodeling an existing house can be useful in maintaining existing setbacks to property lines, and is sometimes a renovation can be more cost effective than  new construction.

IMG_0172 copy

The staircase to the second floor, before being removed. The new stair will be reversed. Most of the steel beams will remain in the new structure.

IMG_0230 copy

The existing structure had been in use in some fashion since it was first built to be a garage in the 1920s. Many elements of old infrastructure  surrounded the building.  Here, a heating oil tank from the 1970s or 1980s is removed to allow room for a new septic system.

IMG_0167The guest house had to be carefully deconstructed by hand, saving key exterior walls. At this stage, the roof has been dismantled, the second floor sheathing removed, and all interior walls demolished.

IMG_0497 copy
A new water line running from an existing main to the guest house awaits inspection.

IMG_0349New foundations are poured within the existing footprint in certain areas to replace insufficient foundations discovered during demolition.

IMG_0227Framers carefully placing the new ridge board. New exterior walls are built with 2×6 lumber to increase strength and insulation values.

IMG_0217Beginning to reframe the second floor ridge. The ocean will be visible from the master bedroom.

IMG_0235 copy

Excavation of a small portion of the old foundation. The MGH team uncovered areas of the existing house that were not built to contemporary standards. Here, a slab foundation- probably part of an old patio that had been enclosed- is removed and dirt is excavated to allow a deeper and more robust foundation.

IMG_0241Framing for new insulated windows on the second floor.


A new kitchen and dining room floor is being framed on top of the new foundation. New construction is carefully integrated to match existing

IMG_0488Welders temporarily shore an existing structural steel beam on the left, and weld in a new column on the right.

IMG_0485 copy

Areas of the old block foundation are reinforced to accept an interior bearing wall. The old foundation spanned 90 years of construction technology, and was assembled out of brick, block and concrete.

IMG_0370Roof framing being completed. The MGH team uses a waterproofed roofing plywood that will keep the house dry temporarily until the roofing is applied. It also serves as a secondary barrier against potential future problems.

200GinLn3Radiant tubing is being laid out on the floor. The tubing is made of heat resistant plastic. It will transport water for the geo-thermal heating and cooling system. The water will heat and cool the concrete topping slab, and radiate into the living areas of the house.

200GinLn2The interior of the kitchen and dining room. The floor assembly is now ready for a concrete topping slab. Wood joists and plywood sheathing have been installed and then covered with tar paper, sleepers, and radiant tubing.

200GinLn7The second floor of the guest house, ready for the concrete topping slab. A 1/2” engineered wood floor will be glued and nailed to the topping slab when the house is ready for interior finishes.

200GinLn4In this portion of the guest house, preparations are being made to pour a new decorative concrete slab on top of an old garage slab. Radiant tubing and conduit for electrical floor outlets are in place.

Southwest ExteriorSouthwest exterior of the guest house with insulated sheathing over most of the exterior frame. The sheathing provides one inch of rigid polyiso insulation continuous over the entire structure. This will reduce heating and cooling needs in all seasons.



2408 Montauk Highway #2A
Bridgehampton, NY 11932